Panasonic CF-52 Series Manual Do Utilizador

This section is available for countries except U.S.A. For U.S.A., do not change to [802.11a Enabled].

z

In some countries, communication using IEEE802.11a (5 GHz wireless LAN) standard is restricted by law.

z

The Wireless Switch Utility icon (

 or 

) indicates the on/off status of wireless LAN and/or Bluetooth and/or 

wireless WAN, not the setting of IEEE802.11a.

z

If IEEE802.11a is enabled or disabled while the computer is connected to an IEEE802.11b/g access point, the connec-
tion will be temporarily interrupted.

z

You can also change the IEEE802.11a setting in [Device Manager].

A

Click [start] - [Control Panel] - [Performance and Maintenance] - [System] - [Hardware] - [Device Manager].

B

Click [Network adapters] and double-click [Intel(R) Wireless WiFi Link 4965AG].

C

Click [Advanced], and then select [Wireless Mode] in [Property].

D

Remove the check mark from [Use default value] in [Value], and select the settings (e.g., [802.11a and 802.11g]).

E

Click [OK].

If you enable or disable 802.11a using the popup menu of Wireless Switch Utility, the setting in [Device Manager] will 
be accordingly changed as below.

[802.11a, 802.11b and 802.11g] 
[802.11b and 802.11g]

a+b+g is enabled

b+g is enabled

[802.11g only]
[802.11a and 802.11g]

a+g is enabled

g is enabled

[802.11a only]
[802.11b only]

a is enabled

b is enabled