Panasonic dp-c354, dp-c264, dp-c323, dp-c263, dp-c213 Manual Do Utilizador

34

 Chapter 2    Basic Fax Transmission

Verification Stamp

This function confirms successful transmission, or storage 
into the memory by stamping at the bottom of each 
successfully transmitted original(s) with a small “x” mark. 

z

The standard setting of the verification is “Off”. The stamp setting can be changed with “04 Stamp (HOME)” in 

Function Parameters (Fax/Email Settings> Fax Parameters). For instructions on how to change the standard setting, 

refer to Fax/Email Settings in the Operating Instructions (For Function Parameters) on the provided CD-ROM.

z

The machine can be configured not to stamp the documents stored in the memory by changing the setting 

“28 Stamp at Memory XMT” in Function Parameters (Fax/Email Settings> Fax Parameters). For instructions 

on how to configure the verification stamp, refer to Fax/Email Settings in the Operating Instructions (For 

Function Parameters) on the provided CD-ROM.

z

Verification Stamp function is only available when scanning documents with the ADF.

z

Because the verification stamp cannot be deleted, be careful not to use the verification stamp when 
transmitting important document(s).

Place Original(s).

z

Refer to Placing Originals (Facsimile/Internet 
Fax) in the Operating Instructions (For Basic 
Operations) of provided booklet.

Press the Fax key.

Select “Basic Menu”.

Select “Verification Stamp”.

Set “Quality Adj.” as required.

z

Refer to Setting Original Quality (see page 
26).

Select “Address Book”, and then 
select a destination.

z

Refer to Entering a Destination (see page 
16).

Press the Start key.

The original(s) are stored into memory with a 
file number. Then starts dialing the telephone 
number.

z

The setting of the “Verification Stamp” is 
returned to the “Off” position after the 
transmission is completed.

Verification Stamp

Ex: Scanning 

Direction

画像ファイル名、
image_026_2.tifに変更してリンクしていま
す。