Panasonic kx-fp141e Manual Do Utilizador
7. Programmable Features
49
5. Press {MENU}.
Code #52 (KX-FP145 only): Setting the
mailbox 2 password
mailbox 2 password
BOX2 PASSWORD
ID=
ID=
To prevent other users from retrieving your
messages, program a password for mailbox 2.
messages, program a password for mailbox 2.
1. Press {MENU}.
2. Press {#}, then {5}{2}.
3. Enter a 3-digit number except a number
using digits 0 or 7.
L
The default ID is “555”.
4. Press {SET}.
5. Press {MENU}.
Code #54 (KX-FP145 only): Changing the
recording time for your TAD/FAX greeting
message
recording time for your TAD/FAX greeting
message
GREETING TIME
=16s
=16s
[
±]
“16s” (default): Maximum recording time is 16
seconds.
“60s”: Maximum recording time is 60 seconds.
See page 37 for details.
seconds.
“60s”: Maximum recording time is 60 seconds.
See page 37 for details.
Code #55 (KX-FP145 only): Greeting
message for mailbox 1
message for mailbox 1
BOX1 GREETING
CHECK
CHECK
[
±]
See page 41 for details.
Code #56 (KX-FP145 only): Greeting
message for mailbox 2
message for mailbox 2
BOX2 GREETING
CHECK
CHECK
[
±]
See page 41 for details.
Code #60 (KX-FP145 only): Setting the
message transfer
message transfer
MESSAGE TRANSFER
=OFF
=OFF
[
±]
To transfer recorded incoming messages to
another telephone (page 43), activate this
feature and program the transfer telephone
number.
another telephone (page 43), activate this
feature and program the transfer telephone
number.
1. Press {MENU}.
2. Press {#}, then {6}{0}.
3. Press {A} or {B} repeatedly to select “ON”.
4. Press {SET}.
5. Enter the transfer telephone number.
6. Press {SET}.
7. Press {MENU}.
Code #61 (KX-FP145 only): Checking,
recording or erasing the transfer greeting
message
recording or erasing the transfer greeting
message
TRNS-GREETING
CHECK
CHECK
[
±]
See page 43 for details.
Code #67 (KX-FP145 only): Setting the
incoming message monitor
incoming message monitor
ICM MONITOR
=ON
=ON
[
±]
To hear an incoming message (ICM) from the
speaker when the answering device is recording
the message.
“ON” (default): You can monitor the incoming
message.
“OFF”: Deactivates this feature.
speaker when the answering device is recording
the message.
“ON” (default): You can monitor the incoming
message.
“OFF”: Deactivates this feature.
Code #68: Setting the Error Correction Mode
(ECM)
(ECM)
ECM SELECTION
=ON
=ON
[
±]
This feature is available when the
transmitting/receiving fax machines are ECM
compatible.
“ON” (default): To send a fax even if there is static
interference on the telephone line.
“OFF”: Deactivates this feature.
transmitting/receiving fax machines are ECM
compatible.
“ON” (default): To send a fax even if there is static
interference on the telephone line.
“OFF”: Deactivates this feature.
Note:
L
You cannot change the setting when received
documents are in memory.
documents are in memory.
Code #70 (KX-FP145 only): Calling your
pager
pager
PAGER CALL
=OFF
=OFF
[
±]
See page 44 for details.
Code #76: Setting the connecting tone
CONNECTING TONE
=ON
=ON
[
±]
If you often have trouble when sending faxes,
this feature allows you to hear connecting tones;
fax tone, ring back tone and busy tone. You can
use these tones to confirm the status of the other
party’s machine.
“ON” (default): You will hear connecting tones.
“OFF”: Deactivates this feature.
this feature allows you to hear connecting tones;
fax tone, ring back tone and busy tone. You can
use these tones to confirm the status of the other
party’s machine.
“ON” (default): You will hear connecting tones.
“OFF”: Deactivates this feature.
FP141-145E.book Page 49 Wednesday, August 20, 2003 11:00 AM