Panasonic KX-PS8100 Manual Do Utilizador
49
Setup
•
The recommended transparency is 3M CG3710.
The transparency has a side to be printed. The other side has a leading
tape.
tape.
When loading the transparency, load it with the taped end entering the
printer first.
printer first.
The transparency can be loaded in the multi-purpose tray and
transparency tray (option). To get better print result, use the transparency
tray. Note that the side to face up differs depending on each tray.
transparency tray (option). To get better print result, use the transparency
tray. Note that the side to face up differs depending on each tray.
To load paper or transparencies:
1
Pull the media tray out of the printer.
To use an appropriate media tray, always check the label indication
on the tray.
on the tray.
2
Remove all packaging materials from inside the media
tray; refer to the instruction sheet attached to the tray.
tray; refer to the instruction sheet attached to the tray.
3
Push down on the metal plate until it clicks, locking it in
place.
place.
Label