Panasonic PT-AX100U Manual Do Utilizador

4. Press ENTER to store the adjusted result.

  “PROCESSING” is displayed for a few seconds 

and the result is stored in LOG.

  You can store up to 8 logs under LOG for each 

PICTURE MODE setting.

5. Press MENU or RETURN to return to the 

previous menu.

  Repeat the steps above to store more 

adjustment.

Q Managing stored logs

You can edit or delete the stored logs of the 
selected PICTURE MODE.

1. Select LOG and press ENTER.

  The LOG menu is displayed.

2. Select the required log from 1 - 8 or ALL

DELETE, and press ENTER.

  Select CHANGE to edit the log.

The cursor menu is displayed and you can 
readjust the color.

  Select DELETE to delete the log.

The confirmation screen will be displayed. 
Select OK to delete.

  When you select ALL DELETE, the "DELETE 

ALL LOG." screen is displayed. Select OK to 
delete all logs. The PROFILE setting will be set 
to NORMAL.

Q Saving a log setting as a profile

Return to the COLOR MANAGEMENT menu and 
save the stored log as a profile. Make sure that the 
PICTURE MODE is not switched.

1. Select the PROFILE SAVE menu and press 

  The PROFILE SAVE menu is displayed. You 

can save the profile as USER1, USER2 and 
USER3.

2. Press ENTER to save the profile

  The confirmation screen is displayed. Press 

ENTER again to save.

J Loading saved profiles

When profiles are loaded under the PICTURE 
MODE setting, you can keep them as you defined 
until the PROFILE is set to NORMAL.

1. Select the required PICTURE MODE and 

press ENTER.

2. Press the COLOR MANAGEMENT button 

and select the PROFILE menu.

  The profile settings of the selected PICTURE 

MODE will be displayed.

3. Select the required profile and press ENTER.

Adjust the vividness of the color.
Setting range: -30 to +30
Default: 0

Adjust the color tone.
Setting range: -30 to +30
Default: 0

Adjust the brightness of the color.
Setting range: -20 to +20
Default: 0

PICTURE MODE : CINEMA1

POINT1

POINT2

POINT3

POINT4

POINT5

POINT6

POINT7

POINT8

ALL DELETE

Sampled color

Adjusted color

Return to the default setting of the 
PICTURE MODE

Defined profile settings.

NOTE:
  LOG and PROFILE SAVE are not displayed 

before you apply COLOR MANAGEMENT.

  If you load a profile with a different attribute mode 

of the profile, the CURSOR and PROFILE SAVE
menus will not be displayed.

  The approximate colors will be adjusted at the 

same time. If you adjust the exact same color 
differently, both colors will affect each other and 
you might get unexpected results.

  White, Black and Grey are not adjustable.
  If you escape the COLOR MANAGEMENT menu 

or attempt to perform another menu action before 
you save the adjusted profile, the confirmation 
screen will be displayed.

  If you switch the input signal before you save the 

profile, the setting will be cancelled without notice.

USER3

USER2

USER1