Panasonic sa-xr707 Manual Do Utilizador
35
RQT8979
Adjusting the
subwoofer level
You can adjust the output level while playing sources. You can adjust the level according to your
preference by thickening or thinning the ultra bass, for example.
preference by thickening or thinning the ultra bass, for example.
Press
to select a level.
• Select “
---
” to stop output.
Adjustment range:
--- (off), MIN (minimum), 5, 10, 15, 20, 25,
MAX (maximum)
Factory setting:
Factory setting:
SUBW 20
• Sound can be distorted if you raise the volume while the subwoofer level is high. Reduce the subwoofer
level if this occurs.
• Adjust the output level by taking steps described in “Testing speaker output/Adjusting speaker
volumes” (
á
page 34) when you wish to make detailed settings.
Silencing speakers
temporarily
Press
• “
MUTING IS ON
” scrolls across the display while the volume is
muted.
• Press the button again to cancel the operation.
Muting is canceled when you turn the unit off or adjust the volume.
Dimming the
display light
(Dimmer)
Press
• Press the button to dim the display. The light above [INPUT SELECTOR] and [VOLUME] goes off.
• Press the button again to cancel the operation.
• Press the button again to cancel the operation.
Refer to page 37 for adjusting the brightness on the unit.
n
On the unit
Detecting speaker
status automatically
You can easily check
connection status of
each speaker when you
want to.
connection status of
each speaker when you
want to.
How speakers are
displayed
L : Front left
C : Center
R : Front right
S : Surround
SB : Surround back
W : Subwoofer
displayed
L : Front left
C : Center
R : Front right
S : Surround
SB : Surround back
W : Subwoofer
Press
simultaneously to check
the speaker presence.
Automatic speaker detection starts.
1) The unit checks the center speaker, surround
1) The unit checks the center speaker, surround
speakers, surround back speakers and the subwoofer
in that order. (The connection status for front speakers
is always present.)
in that order. (The connection status for front speakers
is always present.)
2) The display shows the number of detected speakers
(excluding the subwoofer).
3) The display shows connected speakers.
4) When automatic detection is finished, the display
returns to the original.
• Automatic detection does not work well depending on speakers and cables.
Make speaker settings manually in such cases (
á
page 39).
• These settings remain effective after the unit goes off.
• To enjoy ELS Surround sound, be sure to perform the auto speaker setup (
• To enjoy ELS Surround sound, be sure to perform the auto speaker setup (
á
pages 26 and 27) after
this setting.
• “
WARNING ” messages may appear on the display depending on detection results (
á
below).
SUBWOOFER
Note
MUTING
Note
DIMMER
Note
A
B
SPEAKERS
AUTO DETECTOR
1)
2)
3)
4)
(e.g.)
Note
The right surround back speaker was detected, but the unit did not detect
the left surround back speaker. Use the terminal for the left speaker when
you connect one surround back speaker only (á page 23).
The unit did not detect left and right surround speakers.
Connect surround speakers as well when you connect surround
back speakers to the unit.
the left surround back speaker. Use the terminal for the left speaker when
you connect one surround back speaker only (á page 23).
The unit did not detect left and right surround speakers.
Connect surround speakers as well when you connect surround
back speakers to the unit.
The unit did not detect one of the two surround speakers.
Check speaker connections.
Check speaker connections.
Convenient functions
Operations