Panasonic sa-dx750 Manual Do Utilizador
Customizing your receiver
14
RQT5818
For front speakers with an impedance under 6
Ω
SA-DX850
Turn “LOW IMP“ on if even one of your speakers has an impedance
under 6
under 6
Ω
.
Press and hold [A] or [B] until “LOW IMP”
lights up on the display.
lights up on the display.
Press and hold down again to cancel “LOW IMP”.
Note that when “LOW IMP” is on, SPEAKERS A and B cannot be
used at the same time.
used at the same time.
SPEAKERS A, B
SPEAKERS
A
B
LOW IMP
SPEAKERS
A
D-INPUT
1
1
Press [B] (SA-DX850) or [SFC MODE] (SA-DX750) to select
the input position you want to set.
the input position you want to set.
Each time you press the button:
CD COAX
CD COAX
/
DVD OPT2
/
TV OPT1
↑
These are the factory settings. Actual displays depend on the
changes you make. If you change one setting, the other
corresponding setting will also change.
changes you make. If you change one setting, the other
corresponding setting will also change.
2
2
Turn [INPUT SELECTOR] to change the setting.
When you turn the selector:
COAX
COAX
,
/
OPT1
,
/
OPT2
↑
↑
3
3
Repeat
1
1
and
2
2
to change other D-INPUT settings.
DIMMER
Turn [INPUT SELECTOR] to change the setting.
When you turn the selector:
OFF
When you turn the selector:
OFF
,
/
ON