Panasonic th50pb2u Manual Do Utilizador
37
TOUCH-PEN SETTINGS
STANDBY PEN CHARGING MODE
Sets the power supply for the electronic pen charging terminal (CHARGE, MEMORY/(CHARGE)) in the standby mode
(power OFF with remote control).
OFF: Turns off the charging terminal power in the standby mode.
ON[4hrs]: Turns ON the charging terminal power for 4 hours after entering standby mode.
ON: Leaves the charging terminal power ON in standby mode so that the pen can be charged.
PAIRING
Registers an electronic pen to electronic pen adapter.
Up to four electronic pens can be registered for an electronic pen adapter.
For the details of the pairing, please refer to “Operating Instructions, Electronic Pen Operations”.
Note:
Make sure the electronic pen adapter is connected to the display.
Sets the power supply for the electronic pen charging terminal (CHARGE, MEMORY/(CHARGE)) in the standby mode
(power OFF with remote control).
OFF: Turns off the charging terminal power in the standby mode.
ON[4hrs]: Turns ON the charging terminal power for 4 hours after entering standby mode.
ON: Leaves the charging terminal power ON in standby mode so that the pen can be charged.
PAIRING
Registers an electronic pen to electronic pen adapter.
Up to four electronic pens can be registered for an electronic pen adapter.
For the details of the pairing, please refer to “Operating Instructions, Electronic Pen Operations”.
Note:
Make sure the electronic pen adapter is connected to the display.
[Unpairing]
Unpairs all paired electronic pens.
Unpairs all paired electronic pens.
PEN ADAPTER STATUS
NOT DETECTED: Electronic pen adapter is not connected.
CONFIRMING...: Immediately after connecting an electronic pen adapter and the built-in WhiteBoard “Easy WhiteBoard”
is starting up.
DETECTED: Electronic pen adapter is connected.
1
1
2
2
2
3
4
5
Select “PAIRING” in “TOUCH PEN SETTINGS”
and press
and press
button.
Select “Unpairing All” in “Pairing Tool” and press
button.
Select “Yes” and press
button.
Select “Pairing” and press
button.
While pressing both the remote drawing and the remote
clearing buttons of the electronic pen, press the Power
switch.
To cancel the paring, select “Cancel”.
clearing buttons of the electronic pen, press the Power
switch.
To cancel the paring, select “Cancel”.
When the electronic pen paring is completed,
select “Return” and press
select “Return” and press
button.
Select “Close” and press
button.
If no electronic pen has been registered, the screen of procedure
3
appears fi rst. Follow the instructions on
the screen to register an electronic pen.
Pairing Tool
Close
Unpairing All
Pairing
Pairing Tool
Close
Unpairing All
Pairing
Pairing Tool
Pairing was successful.
Return
Pairing in progress
Set the electronic pen that you want to pair as
pair-enabled and then move it closer to the
electronic pen adapter. For details, refer to the
procedure for registering electronic pens in the
operating instructions for the electronic pen.
Cancel
Pairing Tool
No
Do you want to cancel all pairings?
Yes