Panasonic tx-20lb30a Manual Do Utilizador

22

SD Card

Compact Flash*

Multi Media Card

Smart Media*

miniSD Card

Memory Stick*
xD Picture Card*
Flash ATA Card*

Press the SD button.        

The screen below is displayed automatically
when a card is inserted. If “CARD IS NOT
INSERTED CORRECTLY” appears,
confirm that a card is correctly inserted.
Press the SD button again to exit Photo
View mode.

OK

Index Area
9 files are displayed here.

File Data
The information of the
selected file (framed in
yellow) is displayed.

Access Indication
Access is displayed whilst
data is read.

PC Card Indication
This indication is displayed
whilst PC Card is inserted.

SD Card Indication
This indication is displayed
whilst SD Card is inserted.

• miniSD Card requires miniSD

TM 

adapter.

• The media* listed in the right column above can be read via

the PC Card in the PC Card adapter.

• Hard disk PC Cards and other recorded media cannot be used.
• Place the selected media onto the PC Card and then insert

into the PC Card Slot.

• When both SD Card and PC Card are inserted, the SD Card

contents have priority and will be displayed.

• If the Card is incompatible, “THIS TYPE OF CARD IS NOT

SUPPORTED” is displayed on screen. Remove the Card only
when Access indication is not displayed.

• If the file is not formatted with FAT12 or FAT16, “THIS TYPE

OF FORMAT IS NOT SUPPORTED” is displayed.

• If the JPEG file is corrupted and cannot be decoded, “THIS

TYPE OF IMAGE IS NOT SUPPORTED” is displayed.

Notes:
• Insert / remove the SD Card while Card Menu Screen or

“CARD IS NOT INSERTED CORRECTLY” is displayed.

• Be sure Access  indication is not displayed before Card

insertion / removal.

• Before reinserting the SD Card after removing it, wait until

“CARD IS NOT INSERTED CORRECTLY” is displayed. If
there are Cards in both Card Slots, wait until the Card Menu
Screen of the other Slot is displayed and Access indication
is no longer displayed before reinserting the Card.

• If the JPEG is modified using a PC, it will not be displayed

on the TV.

• It may take long time to display the thumbnail if there are

lots of files or if the file size is big.

Insertion
Insert it to the depth.
 Direct the label side upward.

Removal
Push the center of the card.

Before inserting or removing the PC Card, make sure that the TV is turned
off. Otherwise, it may damage the unit. Do not insert anything other than the
PC Card.

Insertion
Align the direction of   mark.
Label side facing toward the
TV’s front panel.

Terminal face to the depth

     Holding both edges, securely
     insert it to the depth.

If PC Card cannot be removed
Push in PC Card again, and then push
the eject button.

Caution
If PC Card adapter is used, remove it
together with the adapter.

1. Push, the EJECT
    button pops out.

2. Push it again.