Panasonic tx-47p600hz Manual Do Utilizador

Set the overall colour tone of the picture.

C. TEMP
(Colour Temperature)

P-NR
(Picture Noise Reduction)

AI
(Artificial intelligence)

Press to switch between modes

COOL

WARM

STANDARD

Automatically reduces undesired picture noise.

Automatically analyses the incoming picture
and processes it to give improved contrast and
optimum depth of field.

Choose the screen refresh method:

Press to switch between modes

 WEAK  

STRONG 

OFF

AUTO

Press to switch between modes

PROGRESSIVE

100 Hz MODE   

AUTO

MODE

Function

AUTO

100 Hz MODE

PROGRESSIVE

The TV software will select the best mode for the signal being viewed.

100Hz will give a steady picture for most signal transmission.

Recommended when receiving NTSC signals.

Note:
We recommend that you set Scan mode to Progressive when viewing a PAL 60 or
NTSC transmission. When viewing a PAL transmission (other than PAL 60) with Scan
mode set to Progressive, the screen will flicker, this is not a fault.

By pressing the Normal “N” Button on the Remote Control while the Picture menu is displayed, the selected menu will
be changed to the Normal Mode.
Normalization will not occur if the menu is not displayed when the “N” Button is pressed.
The Normal mode is the factory preset condition. Returning to this original condition is called “Normalization”.

Switching is also possible using 

100Hz/

PROGRE

 on the remote control.

ON

OFF