Panasonic WV-BP120 Manual Do Utilizador
-16-
DC:
The mounted lens is one of the lenses listed
on pages 10, 11 and 12 or one that requires
the DC control signal for auto iris control.
on pages 10, 11 and 12 or one that requires
the DC control signal for auto iris control.
VIDEO:
The mounted lens requires video signal for
auto iris control.
auto iris control.
Note:
Refer to item on page 6 for the lens selection
switch.
switch.
FOCUS OR FLANGE-BACK
ADJUSTMENT
The following adjustment should be made by qualified
service personnel or system installers.
service personnel or system installers.
1. Loosen screws on the flange-back adjusting ring.
2. Turn the flange-back adjusting ring to the desired
position.
Caution:
Do not turn this ring too much to counter-
clockwise as this could damage the inner
glass and CCD image sensor.
glass and CCD image sensor.
3. Tighten the screws on the flange-back adjusting
ring.
Note:
Do not apply the excessive torque (0.5
kg.cm, recommended) to the screws on the
flange-back adjusting ring.
flange-back adjusting ring.
Focus adjust for
CS-mount lens
CS-mount lens
Focus adjust for
C-mount lens
C-mount lens