Panasonic WV-CW970 Manual Do Utilizador

Wall Mount Bracket

This catalog is provided for all over the world. 
Some accessories may not be available in some countries.

• Operating Instructions  .................. 1 pc.

• Warranty Card .............................. 1 pc.

The following items are for installation.

• 8P Alarm Cable ............................ 1 pc.

• 4P Alarm Cable ............................ 1 pc.

• Connector for 24 V AC ................. 1 pc.

• Front/rear sun shield .................... 1 set

• Front/rear sun shield mounting screws

............... 2 pcs. (*one screw is a spare)

• Waterproof cap ........................... 3 pcs.

• 

 III technology delivers 128x (NTSC) / 160x (PAL) 

wider dynamic range compared to conventional cameras.

• High resolution: 480 TV lines minimum (Color NORMAL mode),   

540 TV lines typical/520 TV lines minimum (Color HIGH mode),   
570 TV lines minimum (B/W mode) 

• High sensitivity with Day-Night function: 0.5 lux (Color) at F1.4 

(WIDE), 0.04 lux (B/W) at F1.4 (WIDE) IR cut filter goes on and off  
to ensure picture quality of both color and B/W. 

• Adaptive Digital Noise Reduction: Integration of 2D-DNR and       

3D-DNR ensures noise reduction in various conditions.

• Electronic sensitivity enhancement (Auto/Manual).
• 30x zoom lens: 3.8mm ~ 114mm (approx. 300x with digital zoom)
• Panning speed of max. 400

°/s at preset mode and 0.065°/s super 

fine control at manual mode.

• 5 degrees upper view for various applications
• 256 preset positions that can be activated from the system controller 

with a switcher or recorder (specific models).

• Advanced auto tracking with new template matching algorithm.
  

Operates zoom to focus on the target, ON/OFF selectable for each preset position, 

Manual lock-on by controller operation, Alarm activation by tracking duration and 
Alarm area setup.  Auto release to minimize false detection, Total of 8 Masking and 
Alarm areas 

• Built-in Video Motion Detector with Sensitivity 256 steps, Mask 8x6 areas
• Scene Change Detection alarms when lens is covered, spray 

painted, removed or defocused.

• Four alarm inputs and two outputs terminals.
• Alarm actions include Terminal output, Camera positioning, Auto 

pan, Patrol, SEQ, Sort, Auto track, B/W and command output.

• Auto image stabilizer for applications where vibration or wind is a concern.
 

• Internal/Line-lock/Multiplexed Vertical Drive (VD2) synchronization.
• Over the coaxial cable or RS-485 data communication.
• 16 alphanumerics camera tilte display.
• Multi language: English, French, Italian, Spanish, German, Russian, 

Chinese, Japanese

• IP66 rated water and dust resistant. IEC60529 measuring standard 

compatible. 

• Built-in fan/heater for temperature changes of –40 

°C ~ +50 °C   

(–40 

°F ~ +122 °F).

• Built-in sun shield permits camera locations in direct sunlight.