DELL laitude d630 d630 Manual Do Utilizador
Dell
TM
XFR D630 Fully Rugged Notebook Service Manual
Page 66 of 106
Revision A01
Location of left and right display grommets
6. Install hinge on each side, on top of display panel brackets. Secure each hinge to top cover
with 3 M2.5 X 5-mm screws.
NOTE: Hinges are labeled R (right) and L (left) and must be installed on the correct side.
NOTE: Ensure the display cable grommets are properly installed by following the instructions
provided at the beginning of
provided at the beginning of
10.7
Removing the Display Top Cover
CAUTION: Before working inside your computer, follow the safety instructions in the
XFR D630 Product Information Guide and in the XFR D630 User’s Guide.
XFR D630 Product Information Guide and in the XFR D630 User’s Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by
periodically touching an unpainted metal surface (such as a connector on the back of the
computer).
periodically touching an unpainted metal surface (such as a connector on the back of the
computer).
NOTE: Ensure the display cable grommets were removed by following the grommet removal
instructions provided in
instructions provided in
Removing the Display Assembly at step 13.
10.8
Installing the Display Top Cover
NOTE: If replacing the display top cover, remove the replacement display top cover from its
packaging. The new part will have a mylar covering. The antenna cable will be taped to the
inside of the cover. Carefully remove the tape from the antenna cable.
packaging. The new part will have a mylar covering. The antenna cable will be taped to the
inside of the cover. Carefully remove the tape from the antenna cable.