JVC HR-S5965EK Manual Do Utilizador
advanced features
52
Clock Set
You should only need to perform this function if:
• Auto Clock Set was not performed correctly by Auto Setup, Preset Download or Auto Channel
Set
• The VCR’s memory backup has expired
• You want to change the Just Clock setting
• You want to change the Just Clock setting
Setting the Clock
get to the initial set screen
Press
. Move the highlight bar to
INITIAL SET
using the
PR
and
PR
buttons and press
(or E).
get to the clock set screen
Move the highlight bar to
CLOCK SET
using the
PR
and
PR
buttons and press
(or E).
set time and date
When the
CLOCK SET
screen appears, the time will be blinking. Use the
PR
and
PR
buttons to set the correct time (pressing and holding will
advance the time in 30 minute increments) and then press
(or E). The date will blink. Use the
(or E). The date will blink. Use the
PR
and
PR
buttons to
set the correct date (pressing and holding will advance the date in
15 day increments) and then press
15 day increments) and then press
(or E). Set the correct
year in the same way and press
.
set just clock
Set as desired using the
PR
and
PR
buttons
then press
(or E).
set preset for clock data source
If you have set
JUST CLOCK
to
ON
, you will need to
specify a preset (station) for
JUST CLOCK
to take its source data from. Use the
PR
and
PR
buttons to select the preset and press
(or E).
start clock oper ation
Press
.
NOTE:
If the recorder’s memory backup has expired or the AC was disconnected from the recorder, the
recorder will automatically perform Auto Clock Set when the power is restored.
recorder will automatically perform Auto Clock Set when the power is restored.
Notes on Just Clock
Some TV stations transmit a time signal with their broadcasts. This VCR has the ability to use
this signal to update its internal clock (including the adjustment for British Summer Time). It will
do this every hour except for 23:00, 00:00, 01:00 and 02:00. By setting Just Clock to
this signal to update its internal clock (including the adjustment for British Summer Time). It will
do this every hour except for 23:00, 00:00, 01:00 and 02:00. By setting Just Clock to
ON
, you are
enabling the VCR to do this.
Just Clock is not effective in the following circumstances:
Just Clock is not effective in the following circumstances:
• when the VCR is powered on
• when the VCR is in Timer or Auto Satellite Programme Recording modes
• when a difference of more than 3 minutes between the internal clock and the time signal exists.
• when reception conditions are poor.
• when the VCR is in Timer or Auto Satellite Programme Recording modes
• when a difference of more than 3 minutes between the internal clock and the time signal exists.
• when reception conditions are poor.
[1] a k
[MENU]: EXIT
[MENU]: EXIT
CLOCK SET
TIME
DATE
YEAR
0: 00
01 . 01
03
JUST CLOCK : ON
TV PR.
TV PR.
:
1
HR-S5965/5966EK-EN/p52-59
2/19/03, 04:12 PM
52