Toshiba 42LZ196 Manual Do Utilizador

Página de 94
61
LZ196 (E/F) Web 213:276
Chapter 7: Using the THINC
 home network feature
B. Setting up the network address
To set up the network address:
1
First, try automatically setting up the network address 
(below).
2
If the automatic setup is not successful, you can either 
retry the automatic setup (below) or try manually setting 
up the network address (- page 62).
Note:
• If you used an Ethernet crossover cable to connect your PC 
directly to the TV, you will not be able to use the automatic 
setup, and must manually set up the network address.
• If you used a hub or switch to connect the TV to your home 
network, you will not be able to use the automatic setup, and 
must manually set up the network address.
• If you used a router with built-in DHCP functionality, use the 
automatic setup. Manual setup may not work.
Automatically setting up the network 
address 
1
Press Y and open the Setup menu.
2
Highlight Installation and press T. The Installation 
menu appears. 
3
Open the Network menu.
4
Highlight Basic Network Setup and press T.
5
The message “Obtain network address automatically?” 
will display. Highlight Yes and press T.
6
The message “Please wait…” will display while the TV is 
attempting to load the network address information from 
the DHCP server.
If the automatic network address setup is successful, 
go to step 7.
If the automatic network address setup
 is not 
successful, go to step 8.
7
If the automatic network address setup is successful, the 
following screen will appear:
a) Press T to close the screen and return to the Network 
menu.
b) Skip to section C, “Setting up file sharing on your PC” 
(- page 63). 
8
If the automatic network address setup is not successful, 
the following screen will appear:
a) Make sure all cables for your home network are 
securely connected.
b) Make sure your home network is set up properly. See 
the Installation Guide for TV connection 
information. Also consult the owner’s manuals for 
your other components.
c) Make sure the DHCP and security settings on your 
home router are correct. Consult the owner’s manual 
for your router.
d) Retry the automatic network address setup by following 
these steps:
(1) Highlight OK and press T.
(2) Repeat steps 1–6. (If you have already repeated 
this setup process, go to step 9.)
Router technology, like all new and emerging technology, 
may from time to time cause compatibility issues because of 
the differences in router systems implemented by the 
various router manufacturers; however, most issues can be 
easily resolved. If you think your Toshiba TV and router 
might have compatibility problems, please contact the 
following:
In the U.S., call TACP Consumer Solutions at 1-800-631-
3811
 or visit http://www.tacp.com/customersupport/
contact.asp
.
In Canada, call TCL Customer Service at 
1-800-268-3404 or visit http://www.toshiba.ca.
CH RTN
ENTER
EXIT
Navigate
Select
Back
Exit
Basic Network Setup
Personal E-mail Setup
E-mail Scheduling Setup
Home File Server Setup
Software Upgrade
Network
Basic Network Setup
Obtain network address automatically?
Yes
No
Basic Network Setup
Please wait...
Basic Network Setup
Done! Network address information has been found!
Exit
(continued)
LZ196_EN.book  Page 61  Thursday, August 17, 2006  4:19 PM