Toshiba ASD-G9ETH Manual Do Utilizador
67
ICC
Input Instances 70 and 71 Detail
Instance
Byte
Bit
7
Bit
6
Bit
5
Bit
4
Bit
3
Bit
2
Bit
1
Bit
0
0
Running
1
Fault
1
2
Speed Actual (Low Byte)
70
3
Speed Actual (High Byte)
0
At
Ref
Ref
From
Net
Ctrl
From
Net
Rdy
Running
2 (REV)
Running
1 (FWD)
1 (FWD)
Warn Fault
1 Drive
State
2
Speed Actual (Low Byte)
71
3
Speed Actual (High Byte)
Mapping Detail
Faulted: Inverter fault signal (0=not faulted, 1=faulted). Maps to inverter
register 1302 (status 1 word), bit 0.
register 1302 (status 1 word), bit 0.
Warning: This bit is not used (it is always 0).
Running1 (FWD): Running forward status signal (0=not running forward,
1=running forward). Maps to inverter register 1302 (status 1 word), bits 9 and
10. The Running1 bit will be 1 whenever inverter register 1302 bit 9 (direction)
is 0 and bit 10 (running/stopped) is 1, and will be 0 otherwise.
1=running forward). Maps to inverter register 1302 (status 1 word), bits 9 and
10. The Running1 bit will be 1 whenever inverter register 1302 bit 9 (direction)
is 0 and bit 10 (running/stopped) is 1, and will be 0 otherwise.
Running2 (REV): Running reverse status signal (0=not running reverse,
1=running reverse). Maps to inverter register 1302 (status 1 word), bits 9 and
10. The Running2 bit will be 1 whenever inverter register 1302 bit 9 (direction)
is 1 and bit 10 (running/stopped) is 1, and will be 0 otherwise.
1=running reverse). Maps to inverter register 1302 (status 1 word), bits 9 and
10. The Running2 bit will be 1 whenever inverter register 1302 bit 9 (direction)
is 1 and bit 10 (running/stopped) is 1, and will be 0 otherwise.
Ready: Inverter ready signal (0=not ready, 1=ready). The Ready bit will be 1
whenever the Drive State attribute (see below) is in the Ready, Enabled or
Stopping state.
whenever the Drive State attribute (see below) is in the Ready, Enabled or
Stopping state.
CtrlFromNet: Inverter command reference status (0=command reference is not
from network, 1=command reference is from network). Maps to inverter
register 1007, bit 15 (command priority). In other words, CtrlFromNet always
reflects the status of the NetCtrl attribute.
from network, 1=command reference is from network). Maps to inverter
register 1007, bit 15 (command priority). In other words, CtrlFromNet always
reflects the status of the NetCtrl attribute.
RefFromNet: Inverter speed reference status (0=speed reference is not from
network, 1=speed reference is from network). Maps to inverter register 1007,
bit 14 (frequency priority). In other words, RefFromNet always reflects the
status of the NetRef attribute.
network, 1=speed reference is from network). Maps to inverter register 1007,
bit 14 (frequency priority). In other words, RefFromNet always reflects the
status of the NetRef attribute.
AtReference: Up-to-speed signal (0=not up-to-speed, 1=up-to-speed). Maps
to inverter register 1350 (status 3 word), bit 12 (RCH).
to inverter register 1350 (status 3 word), bit 12 (RCH).
Drive State: Indicates the current state of the Control Supervisor Object state
machine. Refer to the ODVA Ethernet/IP specification (object library) for
detailed information on the Control Supervisor Object state machine.
machine. Refer to the ODVA Ethernet/IP specification (object library) for
detailed information on the Control Supervisor Object state machine.