Toshiba portege m400 Manual Do Utilizador

G-2

User’s Manual

TOSHIBA RAID

Windows Manual Setup

Use the following procedures when manually setting up Windows.

Before Setting Up Windows

Before setting up Windows, create the TOSHIBA RAID Driver Disk and 
configure the BIOS setup program.

Creating the TOSHIBA RAID Driver Disk

1. Connect the USB floppy disk drive and insert a floppy disk.

2. Copy all of the files located in C:\TOSAPINS\TOSHIBA RAID 

 to the floppy disk.

Configuring the BIOS Setup Program

In the RAID ARRAY setting of the BIOS setup program, set the built-in 
HDD to 1RAID-0.

It is not necessary to change the setting if it has already been set as such.

Refer to the 

this chapter.

Windows Setup Procedure

1. Insert the Windows Setup DVD into the DVD drive and boot the 

computer from the DVD. The Windows Setup program will start.

2. Carry out the set up process according to the instructions displayed on 

the setup screen. When the message "Which type of 
installation do you want?

" appears, select Custom 

(advanced).

3. When the message "Where do you want to install Windows?" 

appears, click Load Driver.

4. Click the Browse button and then select Floppy Disk Drive(A:).

5. "TOSHIBA RAID" will be displayed in the list which appears, click Next.

6. When the message "Where do you want to install Windows?" 

appears, select the destination drive and then click Next.

7. Follow the onscreen instructions to install windows.

■

■

■

■