Toshiba portмдgмд 3505 Manual Do Utilizador
44
Getting Started
Setting up your computer
5.375 x 8.375 ver 2.4.0
Installing a memory module
Depending on your system’s configuration, the memory slot
may be occupied.
may be occupied.
You need a standard Phillips no. 1 screwdriver to install a
memory module.
memory module.
CAUTION: To avoid damaging the computer’s screws, use a
standard Phillips no. 1 screwdriver that is in good condition.
standard Phillips no. 1 screwdriver that is in good condition.
CAUTION: Do not install or remove a memory module while the
DVD-ROM drive power is on.
DVD-ROM drive power is on.
CAUTION: Installing a memory module with the computer’s power
on may damage the computer, the module, or both.
on may damage the computer, the module, or both.
If the computer is on, begin at step 1; otherwise, skip to step
3.
3.
1
If the computer is on, click Start, Turn Off Computer.
The Turn off computer window appears.
2
Click Turn Off.
The operating system turns off the computer.
3
Unplug and remove any cables connected to the
computer.
computer.
4
Remove the battery.
5
Close the display panel and turn the computer upside
down to locate the expansion memory cover to the
memory slot.
down to locate the expansion memory cover to the
memory slot.