Toshiba satellite a200 Manual Do Serviço

Satellite A200/A205/Pro A200 Series Maintenance Manual    

[CONFIDENTIAL]  

         

48

 

The 2

nd

 HDD or system board may be the reason of a HDD fault. Either of these two 

components may be damaged. To determine if the computer’s 2

nd

 HDD is functioning 

properly, perform the following procedures. Figure 2-15 outlines the process. Start with 

Procedure 1 and continue with the other procedures as instructed. 

Procedure 1:  Diagnostic test 

Procedure 2:  Connector and replacement check 

Run the Diagnostic Program, which will automatically execute the 2

nd

 HDD R/W test.  Refer 

to Chapter 3, Tests and Diagnostics for more information on the program. 

If an error is located, go to Procedure 2.  If an error is not located, the 2

nd

 HDD function is 

functioning properly. 

 

The 2

nd

 HDD module or system board may be disconnected or damaged.  Disassemble the 

computer following the steps described in Chapter 4, Replacement Procedures, and perform 
the following checks. 

 

Check 1 

Make sure that the 2

nd

 HDD module is securely slotted into the system board. If 

the problem persists, go to Check 2. 

Check 2 

The 2

nd

 HDD module may be damaged. Replace it with a new one following the 

instructions in Chapter 4. If the problem still exists, perform Check 3. 

Check 3 

The system board may be damaged.  Replace it with a new one following the 
instructions in Chapter 4.