kymco mo x500 Manual Do Serviço

Página de 11
17
. BATTERY/CHARGING SYSTEM
 
17-4
   XCITING 500
TROUBLESHOOTING
Battery is damaged or weak
•Faulty battery
       
•Faulty regulator/rectifier.
•Shorted wire harness.
•Faulty ignition switch.
•Faulty charging coil.
•Faulty battery.
•Open circuit in related wire.
•Loose or poor contacts of related
 terminal.
•Shorted wire harness
•Faulty regulator/rectifier
Correct
Correct
Correct
Remove the battery.
Check the battery condition.
Install the battery.
Check the battery current leakage.
Specified current leakage: 0.5 Ma
max
Check the alternator charging coil.
Standard: 0.1 – 0.5 
Ω (20°C/68°F)
Measure and record the battery
voltage using a digital multimeter.
Start the engine.
Measure the charging voltage.
Compare the measurements to result
of the following calculation.
Measured voltage < measured
charging voltage < 15.5 V
Perform the regulator/rectifier wire
harness inspection.
Correct
Correct
Disconnect the regulator/rectifier
connectors and recheck the battery
current leakage.
Incorrect
Incorrect
Incorrect
Incorrect
Incorrect
Correct
Incorrect