kymco mo kxr 50 Manual Do Serviço

Disconnect the starter motor cable.

Remove two mounting bolts at the starter

motor attaching left crankcase, then remove

the starter motor. (Mongoose/KXR 90’s

starter motor is located on the engine.
Mongoose/KXR 50’s starter motor is

located under the engine.)

DISASSEMBLY
Remove the two starter motor case screws,

front cover, motor case and other parts.

INSPECTION
Inspect the removed parts for wear, damage

or discoloration and replace if necessary.

Clean the commutator if there is metal

powder between the segments.

Check for continuity between pairs of the

commutator segments and there should be

continuity.

Also, make a continuity check between

individual commutator segments and the

armature shaft. There should be no

continuity.

AC 110V

Bolts

Before removing the starter motor, turn

the ignition switch OFF and remove the

battery ground. Then, turn on the

ignition switch and push the starter

button to see if the starter motor

operates  properly.

Front  Cover

Commutator

Motor  Case

Case Screws

Starter  Motor