BMW serie 3 sport wagon 2002 Manual Do Utilizador
37
n
Overview
Controls
Maintenance
Repairs
Data
Index
Electric power windows
Open and close windows
From ignition key in position 1.
>
Press the switch until you feel resis-
tance: the windows retract as long as
you maintain pressure on the switch
tance: the windows retract as long as
you maintain pressure on the switch
>
Press the switch briefly past the pres-
sure point: the windows move auto-
matically. Pressing the switch again
stops the opening cycle.
sure point: the windows move auto-
matically. Pressing the switch again
stops the opening cycle.
You can close the windows in the same
manner by pulling the switch.
manner by pulling the switch.
If your vehicle is equipped with optional
electric power windows in the rear
electric power windows in the rear
*
separate switches will be located below
the windows.
the windows.
After the ignition has been switched off:
You can still use the electric power
windows for up to 15 minutes, as long
as no one opens any of the front doors.
You can still use the electric power
windows for up to 15 minutes, as long
as no one opens any of the front doors.
When leaving the vehicle, always
remove the ignition key from the
remove the ignition key from the
lock and remember to close the doors
to prevent children from operating the
power windows and injuring them-
selves, etc.
to prevent children from operating the
power windows and injuring them-
selves, etc.
<
.
Safety feature
The front windows are each equipped
with contact strips located in the upper
window frames. If pressure is exerted
against this contact strip while a
window is being raised, the system will
respond by stopping the window and
then retracting it a small distance.
with contact strips located in the upper
window frames. If pressure is exerted
against this contact strip while a
window is being raised, the system will
respond by stopping the window and
then retracting it a small distance.
Despite this safety feature, be
extremely careful to ensure that
extremely careful to ensure that
the closing path of the window is not
obstructed. Some types of objects
might fail to trigger the contact strip in
some situations (very thin objects, for
instance). You can override this safety
feature by pressing the switch beyond
the resistance point and holding it.
obstructed. Some types of objects
might fail to trigger the contact strip in
some situations (very thin objects, for
instance). You can override this safety
feature by pressing the switch beyond
the resistance point and holding it.
<
Online Edition for Part No. 01 41 0 156 156 - © 09/01 BMW AG