BMW serie 3 sport wagon 2002 Manual Do Utilizador

Overview

Controls

Maintenance

Repairs

Data

Index

Check Control

Clock

The following information and/or condi-
tions are indicated using symbols,
starting with the ignition key in
position 2, until the condition has been
corrected.

1 Check the low beams and high

beams, as well as the parking lamps

2 Door open

3 Tailgate open

4 Check brake and tail lamps

When you open the driver's door after
parking, a signal sounds to remind you
if the headlamps have not been
switched off.

If you wish to have a permanent time
display, you can make this setting in the
radio display (refer to the Radio
Owner's Manual).

You can set the clock and the time
display in the car radio as follows.

Setting

With ignition key position 1 or 2 and
time displayed in the instrument cluster.

To set ahead: turn the button to the
right.

To set back: turn the button to the left.

The adjustment speed will increase the
longer you continue to hold the button.

To change the display mode: press the
button briefly.
Every time you press the button, the
clock display alternates between the
12-hour or 24-hour mode.

In ignition key position 0: the time is
displayed for a few seconds after you
press the left button, refer to
Odometer on page