BMW serie 3 sport wagon 2002 Manual Do Utilizador

Parking lamps/Low beams

Parking lamps

The front, rear and side vehicle
lighting is switched on. You can
use the parking lamps for

parking. For lighting on one side for
parking as an additional feature, refer to
page

Low beams

When the ignition is switched off
while the low beams are on, the
headlamps go out and only the

parking lamps remain on.

Follow me home lamps
When you activate the headlamp

flasher after parking the vehicle with the
lamps turned off, the low-beam head-
lamps will come on for a short time.You
can also have this function deacti-
vated.

LIGHTS ON warning

When you open the driver's door after
having turned the ignition key to posi-
tion 0, you will hear an acoustic signal
for a few seconds to remind you if the
lamps have not been switched off.

Daytime driving lamps

If you desire, the lamp switch can be
left in the second position:
When the ignition is switched off, the
external lighting is also switched off.

You can have the activation
settings for the daytime driving

lamps programmed on your vehicle.

Automatic headlight control

When the switch is set to this
position the system automati-
cally activates and cancels the

low beams in response to changes in
ambient light ( in tunnels, at dusk, etc.)
as well as rain and snow.

The vehicle's external lights
remain on constantly when you

switch on the front fog lamps after the
headlights have come on automati-
cally.

Automatic headlight control
cannot serve as a substitute for

the driver's judgement in determining
when the vehicle lights should be
switched on. For example, the sensors
are not able to detect fog. To avoid
safety risks, you should respond to
these kinds of low-visibility situations
by switching the headlights on manu-
ally.

You can have the sensitivity of
your vehicle's automatic head-

light control adjusted.