kymco mo super 950 Manual Do Serviço

OIL INLET LINE/OIL PUMP BLEEDING
Fill the oil tank with recommended oil.

Place a shop towel around the oil pump.

Disconnect the oil inlet line from the oil

pump and clip it.

Fill the oil pump with oil by squirting clean

oil through the joint. (About 3cc)

Fill the oil line with oil and connect it to the

oil pump.

OIL OUTLET LINE BLEEDING
1. Disconnect the oil outlet line and bend it

into U shape.  Force air out of the tube

by filling it with oil.

2. Start the engine and allow it to idle with

the oil control lever in the fully open

position.  Visually check the oil flow.

3. If there is no oil flowing out within 1

minute, bleed air from the oil inlet line

and oil pump.

• Air in the oil lines will block oil flow

and result in severe engine damage.

• Bleed air from the oil lines and oil

pump whenever the oil lines or pump

have been removed or there is air in the

oil lines.

＊

Bleed air from the oil inlet line first,

then bleed air from the oil outlet line.

＊

• Never run the engine in a closed area.
• Do not increase the engine speed at

will.

＊

Oil Tube

Oil Outlet Line

Oil Pump

Oil Outlet Line

Intake  Manifold