BMW X5 2002 Manual Do Utilizador

Alarm system

Electric power windows

If the indicator lamp flashes for
10 seconds when the system is
disarmed: an attempted entry has
been detected in the period since the
system was armed.

Following triggering of an alarm, the
indicator lamp will flash continuously.

Avoiding unintentional alarms

The tilt alarm sensor and interior motion
sensor may be switched off at the same
time. To prevent a false alarm from
being triggered (in garages with
elevator ramps, for instance), or when
the vehicle is transported by trailer or
train:

Actuate (= arm the system) the lock
twice; in other words, press button 2 of
the remote control twice in succession,
refer to page

. You may also actuate

the locks twice with the key, refer to
page

The indicator lamp lights up briefly and
then flashes continuously. The tilt alarm
sensor and the interior motion sensor
are deactivated as long as the system is
armed.

Interior motion sensor

In order for the interior motion sensor to
function properly, the windows and
sliding/tilt sunroof must be completely
closed.

However, be sure to switch off the inte-
rior motion sensor (see the previous
column) when you

leave children or animals in the
vehicle

intend to leave the windows or
sliding/tilt sunroof open.

Open and close windows

From ignition key position 1:

Press the switch up to the pressure
point:
The window continues to move as
long as you continue to hold the
switch

Press the switch beyond the pressure
point:
The window moves downward auto-
matically. Touch the switch again to
stop the opening movement.

You can close the windows in the same
manner by pulling the switch.

530us020