BMW serie 3 sedan 2001 Manual Do Utilizador

Página de 211
148
n
Caring for your vehicle
Caring for the vehicle finish 
Regular washing is a preventive 
measure against long-term effects from 
substances that are harmful to the 
vehicle's finish, especially if you drive 
your vehicle in areas with high levels 
of air pollution or aggressive natural 
substances (tree resins, pollen).
Nevertheless, you should immediately 
remove especially aggressive 
substances. Failure to do so can lead 
to changes in the paint's chemical 
structure or to discoloration. Gasoline 
spilled during refueling, oil, grease and 
brake fluid should always be cleaned 
away immediately, as should bird 
droppings.
Any contamination remaining on the 
surface of the vehicle will be especially 
conspicuous after washing. Use clean-
ing fluid or alcohol with a clean cloth or 
cotton pad to remove. Remove tar spots 
with tar remover. After cleaning, the 
affected areas should be waxed to 
ensure continued protection.
Use cleaning and car-care 
products that you can obtain at 
your BMW center.
<
Waxing your vehicle 
Protect the finish using carnauba or 
synthetic-based waxes only.
The best way to determine when the 
finish needs to be waxed is by noting 
when water stops beading on the 
surface.
You can use a glass cleaner to remove 
any wax or silicone that may have been 
left on the windows during waxing.
Use cleaning and car-care 
products that you can obtain at 
your BMW center.
<
Paint damage
You can touch up small areas of paint 
damage with a BMW spray paint or a 
BMW touchup stick. 
The paint color code for your vehicle is 
provided on a sticker located on the 
right hand side under the hood and on 
the first page of your Service and War-
ranty Information Booklet (US models) 
or Warranty and Service Guide Booklet 
(Canadian models).
Damage caused by flying stones, 
scratches, etc., must be touched 
up without delay to prevent rust from 
forming.
If corrosion has started to form in an 
area with paint damage, remove all rust 
and clean the area. Then prime the area 
with a BMW Primer Stick. Finally, apply 
the finish coat. Wait a few days, then 
polish the repaired area. Finish by 
applying a wax preservative.
More extensive paint damage should 
be professionally repaired in accor-
dance with the manufacturer's instruc-
tions. Your BMW center uses original 
BMW finish materials in accordance 
with official repair procedures.
Online Edition for Part No. 01 41 0 155 476 - © 09/00 BMW AG