BMW serie 3 sedan 2001 Manual Do Utilizador

166

Changing a wheel

Spare tire or space-saver spare tire
Located next to the jack.
Loosen the wing nut (arrow) by hand,
remove the storage tray and take out
the spare wheel

Lug wrench – is in the onboard tool
kit on the underside of the luggage
compartment lid (refer to page

158

460de059

Procedure

1 Read and comply with the safety

precautions provided on the
previous page

2 Secure the vehicle from rolling:

Place the wedge against the rear
surface of the front tire on the side
opposite the side being raised. If
the vehicle is parked on a down-
ward slope, place the wedge
securely in front of the tire. If the
wheel must be changed on a
surface with a more severe slope,
take additional precautions to
secure the vehicle from rolling

3 If your wheels are equipped with full

wheel covers

: reach into the venti-

lation openings and pull off the
cover

460de124

4 Loosen the lug bolts g turn
5 Position the jack at the jacking point

closest to the flat tire (refer to the
center illustration) so that the jack
base is vertically below the jacking
point and the entire surface of the
head of the jack will move into the
square recess of the jacking point
(refer to the illustration detail) when
the jack is cranked

6 Jack the vehicle up until the wheel

you are changing is raised from the
ground

7 Unscrew the lug bolts and remove

the wheel

8 Remove accumulations of mud or

dirt from the mounting surfaces of
the wheel and hub; clean the lug
bolts

460de190