BMW x5 2000 Manual Do Utilizador

150

OBD interface socket

The Onboard Diagnostic (OBD) inter-
face socket is located on the left of the
driver's side at the bottom of the instru-
ment panel and under a cover.
The cover has the letters "OBD" on it.

The purpose of the OBD system is to
ensure proper operation of the emis-
sion control system for the vehicle's
lifetime. The system monitors emission-
related components and systems for
deterioration and malfunction.

530us105

An illuminated lamp informs you
of the need for service, not of
the need to stop the vehicle.

However, the systems should be
checked by your BMW center at the
earliest possible opportunity.

Under certain conditions, the indicator
will blink or flash. This indicates a rather
severe level of engine misfire. When
this occurs, you should reduce speed
and consult the nearest BMW center as
soon as possible. Severe engine misfire
over only a short period of time can
seriously damage emission control
components, especially the catalytic
converter.

Warning lamp, Service Engine
Soon for Canadian models.

When the filler cap is not properly
tightened, the OBD system can

detect the vapor leak and the indicator
will light up. If the filler cap is subse-
quently tightened, the indicator should
go out within a few days.