BMW x5 2000 Manual Do Utilizador

Index

Data

Technology

Repairs

Car care

Controls

Overview

BMW Universal Transmitter

Programming

1 Channel keys

2 Indicator lamp

3 Receiver for programming

Read and comply with the safety
precautions on the previous

page.

1 Turn the ignition key to position 2.
2 For initial use: press and hold both

outside keys 1 until the indicator
lamp 2 flashes, and then release
them. The three channel keys are
cleared.

530us136

3 Hold the original hand-held transmit-

ter toward the receiver 3 a maximum
of 2 inches (5 cm) away.

4 Press the transmission key of the

original hand-held transmitter
(arrow 2) and the desired channel key
of the Integrated Universal Remote
Control (arrow 1) simultaneously. Re-
lease both keys as soon as the indi-
cator lamp flashes rapidly.

5 To program other original hand-held

transmitters, repeat steps 3 and 4.

The corresponding channel key is now
programmed with the signal of the orig-
inal hand-held transmitter.

530us137

Programming a hand-held
transmitter with conversion code

Read and comply with the safety
precautions on previous page.

When programming the BMW Universal
Transmitter, consult the instructions for
the specific device. For using the BMW
Universal Transmitter with a conver-
sion-code system, note the following
supplemental programming instruc-
tions:

A second person facilitates
programming of the BMW

Universal Transmitter.

1 Program the BMW Universal

Transmitter as described previously
under "Programming."

2 Press and hold the programming key

on the receiver of the device for ap-
proximately two seconds until the
programming lamp on the device
comes on.

3 Press the desired channel key of the

BMW Universal Transmitter three
times.

If you have additional questions,
please consult your BMW cen-

ter.