BMW x5 2003 Manual Do Utilizador

Overview

Controls

Maintenance

Repairs

Data

Index

Check Control

Graphic display

The following alerts or status messages
are displayed with icons from ignition
key position 2 and up until the defects
are corrected:

1 Check low beams

2 Add washer fluid (goes out after

approx. 1 minute)

3 Door open

4 Tailgate open

5 Check brake and tail lamps. A defec-

tive center brake lamp is indicated by
the upper symbol.

When you open the door after stopping,
a warning signal sounds without a
visual indicator for:

LIGHTS ON

KEY IN IGNITION LOCK.

390de121

Alphanumeric display

Text messages are used to alert the
driver to system malfunctions when the
ignition key is turned to position 2. The
alert is accompanied by an acoustic
signal.

1 Status messages symbol

2 Display

3 CHECK button

Messages concerning system faults are
differentiated based on two priorities:

390us111

Priority 1

These defects are immediately indi-
cated by an acoustic signal and a
flashing warning symbol 1. Simulta-
neous defects will be displayed con-
secutively. These status messages
remain in the display until the defects
are corrected. They cannot be deleted
by pressing the CHECK button 3:

RELEASE PARKINGBRAKE

COOLANT TEMPERATURE
The coolant is overheated. Stop the
vehicle immediately and switch off
the engine, refer to pages

and

143

STOP!ENGINE OILPRESS
The oil pressure is too low. Stop the
vehicle immediately and switch off
the engine, refer to pages

and

141