BMW x5 2003 Manual Do Utilizador

Computer

Mode selection

From ignition key position 1 and up,
you can call up information from the
computer using the button in the turn
signal lever. By pressing the button
briefly in the direction of the steering
column, you can call up a new function
for display.

The displays appear in the following
order: outside temperature, average
fuel consumption, cruising range,
average speed.

Starting with ignition key position 1,
the last active setting is displayed.

The range of available displays varies
according to your individual vehicle's
equipment.

530de228

Outside temperature and average
fuel consumption

You can change the units of measure-
ment – 6/7 – for the outside tempera-
ture display by

1. pressing and holding the trip odo-

meter reset button with the ignition
key in position 1

2. and then turning the ignition key to 0.

At the same time the units of mea-
surement in the temperature display
of the automatic climate control will
be changed, refer to page

105

Refer also to page

390us126

Cruising range and average speed

The computer bases its calculations
of the cruising range on the previous
driving style and conditions.

The computer ignores any time spent
with the vehicle stationary and the
engine switched off in its average
speed calculations.

To cancel the display

If the button in the turn signal lever is
pressed briefly while the average speed
is displayed, the computer display can
be masked out.

To restart calculations

If you continue to press the button in
the turn signal lever, the average values
which were just displayed for fuel con-
sumption and speed will be recalcu-
lated from that point. The engine must
be running for this calculation.

Computer with alphanumeric
display

If your vehicle has Check Control with
alphanumeric display, the system's
computer is described beginning on
page

and in the Owner's Manual for

the Onboard Computer.