BMW serie 3 sedan 2000 Manual Do Utilizador

Index

Data

Technology

Repairs

Car care

Controls

Overview

Graphic display

The following information and/or condi-
tions are indicated using symbols, start-
ing with the ignition key position 2, until
the condition has been corrected.

1 Inspect the low-beam and high-beam

headlamps, as well as the side lamps

2 Door open
3 Luggage compartment lid open
4 Check brake and tail lamps.

After the completion of a trip and when
the driver's door is opened, an acousti-
cal signal is given for "Lamps on" if the
lamps have not been switched off.

460de083

If you wish to have a permanent time
display, you can make this adjustment
in the radio display (refer to the Radio
Owner's Manual).

You can adjust the clock and the time
display in the car radio as follows.

Adjustments

In ignition key position 1 and 2

To set ahead: Turn the button to the
right.

To set back: Turn the button to the left.
The adjustment speed will increase the
longer you continue to hold the button.

To change the display mode: Press the
knob briefly.
Every time you press the knob, the
clock display alternates between the
12-hour or 24-hour mode.

In ignition key position 0: The time is
displayed for a few seconds after you
press the left button (refer to "Odome-
ter" on page

460de078

Check Control

Clock