BMW serie 3 sedan 2000 Manual Do Utilizador
82
n
Parking lamps
With the switch in this position,
the front, rear and side vehicle
lighting is switched on. For light-
the front, rear and side vehicle
lighting is switched on. For light-
ing on one side for parking, refer to
page
page
Low beam headlamps
When you switch the ignition off
with the low beam headlamps
on, only the parking lamps will
with the low beam headlamps
on, only the parking lamps will
remain on.
"Follow-me-home lighting:"
If you actuate the headlamp
If you actuate the headlamp
flasher after you have parked the vehi-
cle and shut off the engine, the low
beams will remain on for a brief period.
You can also have this function deacti-
vated.
cle and shut off the engine, the low
beams will remain on for a brief period.
You can also have this function deacti-
vated.
<
460us035
LAMPS ON warning
When you open the driver's door after
turning the ignition key to position 0, an
acoustic signal sounds for a few sec-
onds to remind you that the headlamps
have not been switched off.
turning the ignition key to position 0, an
acoustic signal sounds for a few sec-
onds to remind you that the headlamps
have not been switched off.
Daytime running lamps
*
If you desire, the light switch can be left
in the second position:
When the ignition is switched off, the
external lighting is also switched off.
in the second position:
When the ignition is switched off, the
external lighting is also switched off.
Turn the rotary dial to adjust the illumi-
nation intensity.
nation intensity.
460us036
Parking lamps/Headlamps
Dash lighting
Online Edition for Part No. 01 41 0 155 024 - © 07/99 BMW AG