BMW z4 roadster 3.0i-2003 Manual Do Utilizador

 85

1.

Open the caps with a suitable object – 
coin or screwdriver

2.

Flip open the headlamp cover.

1.

Pull the wire clamp out straight, see 
arrow 

2.

Fold the wire clamp down past the 
catches; see arrows

3.

Flip the protective cover open and 
remove.

Reinstall the protective cover care-
fully. If the protective cover is not on 

tight, the headlamp installation could be 
damaged.

<

1.

Insert the protective cover into the 
guides

2.

Check that the protective cover is posi-
tioned correctly

3.

Press the wire clamp past both 
catches; see arrow.

Left side of engine compartment:

Low beams

High beams

H7 bulb, 55 watts

The H7 bulb is pressurized. There-
fore, wear safety glasses and protec-

tive gloves. Failure to comply with these 
precautions could result in physical injury if 
the bulb is damaged.

<

1.

Turn the bulb holder to the left and pull 
out

2.

Remove and replace the bulb

3.

Install in the reverse order.

When cleaning the headlamps, 
please observe the instructions in the 

Caring for your vehicle brochure.

<

The service life of these bulbs is very long 
and the probability of a failure is very low, 
provided that they are not switched on and 
off an unusual number of times. If one of 
these bulbs should nevertheless fail, it is 
possible to continue driving with great cau-

Online Edition for Part-No. 01 41 0 156 897 - © 09/02 BMW AG