BMW z4 roadster 3.0i-2003 Manual Do Utilizador
Controlling the climate for pleasant driving
56
Air distribution
You can direct airflow onto the
windows
windows
, toward the upper
body
and into the footwell
.
All intermediate settings are pos-
sible.
Air supply/blower
You can set the blower to 8 differ-
ent levels. Both heating and ven-
tilation become more effective as
the air supply rate is increased.
ent levels. Both heating and ven-
tilation become more effective as
the air supply rate is increased.
Temperature
In order to increase the tempera-
ture of the passenger compart-
ment, turn to the right – red zone.
ture of the passenger compart-
ment, turn to the right – red zone.
Air conditioning
The air is cooled and dehumidi-
fied and – depending on the tem-
perature setting – rewarmed.
Depending on the weather, the
fied and – depending on the tem-
perature setting – rewarmed.
Depending on the weather, the
windshield may fog over briefly when the
engine is started.
engine is started.
Condensation forms during operation
of the air conditioning system, which
of the air conditioning system, which
then exits under the vehicle. Traces of con-
densed water on the ground underneath
the vehicle are thus normal.
densed water on the ground underneath
the vehicle are thus normal.
<
Outside-air/recirculated-air mode
If there are unpleasant odors in
the outside air, you can tempo-
rarily block the supply of incom-
ing air. The system then recircu-
the outside air, you can tempo-
rarily block the supply of incom-
ing air. The system then recircu-
lates the air currently within the vehicle.
If the windows fog over in the recircu-
lated air mode, switch this mode off
lated air mode, switch this mode off
and increase the air supply as required.
<
Rear window defroster
The indicator lamp lights up when
the rear window defroster is
active. The rear window defroster
switches off automatically.
the rear window defroster is
active. The rear window defroster
switches off automatically.
Ventilation
You can adjust the blower controls for the
upper body area to obtain the optimum air-
flow rates and directions for your personal
requirements:
upper body area to obtain the optimum air-
flow rates and directions for your personal
requirements:
1
Rotary dials for opening and closing the
vents at any setting desired
vents at any setting desired
2
Lever for adjusting airflow direction
Particle filter
The built-in particle filter removes dust and
pollen from the incoming air and in the
recirculated air mode. Your BMW center
will replace this filter during the regularly
scheduled maintenance. A substantial
reduction in airflow indicates that the filter
needs to be replaced earlier.
pollen from the incoming air and in the
recirculated air mode. Your BMW center
will replace this filter during the regularly
scheduled maintenance. A substantial
reduction in airflow indicates that the filter
needs to be replaced earlier.
To defrost windows and remove
condensation
condensation
1
Turn the rotary control to
2
Turn the rotary blower control for the air
supply completely to the right
supply completely to the right
3
Turn the rotary temperature control
completely to the right
completely to the right
4
To defrost the rear window, switch on
the rear window defroster
the rear window defroster
Online Edition for Part-No. 01 41 0 156 897 - © 09/02 BMW AG