BMW z4 roadster 2.5i-2003 Manual Do Utilizador

At a glance

Controls

Driving tips

Mobility

Reference

Press memory button

1, 2 or 3, as

desired. The indicator lamp goes out.

To select a stored setting

Do not select a memory position while
the vehicle is moving. If you do so,

there is a risk of accident due to unex-
pected seat movement.

Ignition key position

Briefly press memory button

1, 2 or 3,

as desired.
Movement stops immediately when one
of the seat adjustment or memory but-
tons is operated during the adjustment
process.

With the driver's door closed and the igni-
tion key either removed or in position

Press and hold the desired memory
button –

1, 2 or 3 – until the adjustment

process is completed.

If you press the

EMORY button

accidentally: press the button again;

the indicator lamp goes out.

You can have your vehicle adjusted in
such a way that your personal set-

tings are automatically set for the seat
positions when you unlock the vehicle with
your personal remote control.

If you make use of this method of
adjustment, be sure that the space

behind the driver's seat is unobstructed
before unlocking the vehicle. If you fail to
do so, objects behind the seat could be
damaged by a rearward movement of the
seat.

Seat heating*

The seat cushion and backrest can be
heated with the ignition key in position

You can call up different heating modes by
repeatedly pressing the buttons.

The seat heating can also be switched off
from the higher heating modes:
Press the button and hold it slightly longer.

Safety belts

Always fasten your safety belt before start-
ing off. As supplemental restraint devices,
the airbags are designed to enhance the
effectiveness of the safety belts, and not to
replace them.

To close

Make sure you hear the lock engage in the
belt buckle.

Please fasten safety belts warning
lamp:
Lights up for several seconds.

An acoustic signal will sound at the same
time.