BMW z4 roadster 2.5i-2003 Manual Do Utilizador

At a glance

Controls

Driving tips

Mobility

Reference

Wheels and tires

Tire inflation pressure

Information for your safety

The factory-approved Run Flat tires are
matched to the vehicle and have been
selected to provide optimum safety and
driving comfort.

It is not merely the tire's service life, but
also driving comfort and – above all else –
driving safety that depend on the condition
of the tires and the maintenance of the
specified tire pressure.

Incorrect tire inflation pressure is a fre-
quent cause of tire damage. It also signifi-
cantly influences the roadholding ability of
your BMW.

Check tire inflation pressures regu-
larly – at least every two weeks and

before every extended journey. If this is not
done, incorrect tire pressures can cause
driving instability or tire damage, ultimately
resulting in accidents.

Checking tire pressures

The specified inflation pressures are pro-
vided on a sticker attached to the B-pillar
and are visible when the driver's door is
open.

All pressures are specified in the units usu-
ally used in your country – psi and kilopas-
cal – for tires at ambient temperatures; also
refer to the following tire inflation pressure
table.

Reinitialize the Flat Tire Monitor after
correcting the tire inflation pressure.

Refer to page

Comply with tire approval
specifications

The inflation pressures in the table apply to
BMW-approved tire sizes and tire brands.
Your BMW center will be glad to supply this
information. Other tire brands may require
a higher inflation pressure, which may
impair handling and vehicle response.