BMW serie 7 1999 Manual Do Utilizador

108

n

The Integrated Universal Remote Con-
trol replaces up to three hand-held 
transmitters of different devices such as 
garage-door openers, alarm systems, 
or door locking systems. The Integrated 
Universal Remote Control recognizes 
and "learns" the transmitted signal of 
each of the original hand-held transmit-
ters.

The signal of an original hand-held 
transmitter can be programmed on one 
of the three channel keys. Following 
that, each of the devices can be actu-
ated with the appropriately-program-
med channel key. Transmission of the 
signal is signaled by the indicator lamp.

If the vehicle is sold, the memory of the 
channel keys should be cleared as de-
scribed on page 

During programming and before 
every remote actuation of a pro-

grammed device by the Integrated Uni-
versal Remote Control, check to be 
sure that there are no persons, animals 
or objects within the actuation range of 
the device in order to prevent possible 
injuries or damage. Also, comply with 
the safety precautions of the original 
hand-held transmitter.

<

 

To Canadian residents:
During programming, your hand-

held transmitter may automatically stop 
transmitting after two seconds, which 
may not be long enough to program the 
BMW Universal Transmitter. If you are 
programming from one of these hand-
held transmitters, the Universal Trans-
mitter's light may begin to flash in a se-
ries of double-blinks. If this occurs, 
continue to hold the button on the Uni-
versal Transmitter while you reactivate 
your hand-held transmitter. You may 
have to repeat this function several 
times while programming.

<

 

Before programming, read the 
"User information" section on 

<

 

If this symbol is present on the 
packaging or in the instructions 
of the original hand-held trans-

mitter, it may be assumed that this 
hand-held transmitter is compatible 
with the Integrated Universal Remote 
Control.

To determine whether the original 
hand-held transmitter is provided with a 
conversion-code system, you may ei-
ther read the instructions for the original 
hand-held transmitter or program a 
channel key as described on page 

(left-hand column under "Program-
ming").

Then press and hold the programmed 
channel key of the Integrated Universal 
Remote Control. If the indicator lamp of 
the Integrated Universal Remote Con-
trol flashes for two seconds and then 
comes on steadily, the original hand-
held transmitter is provided with a con-
version-code system. With a conver-
sion-code system, program the channel 
keys as described on page 

 (right-

hand column under "Programming a 
hand-held transmitter with conversion 
code").

If you have additional questions, 
please consult your BMW center 

or call 1-800-355-3515.

<

 

Online Edition for Part-No. 01 41 9 791 187 - © 12/98 BMW AG