BMW serie 7 1999 Manual Do Utilizador

Página de 211
149
n
Repairs
Index
Overview
Controls
Car care
Technology
Data
The BMW Maintenance System
The BMW Maintenance System has 
been designed as a reliable means of 
providing maximum driving and operat-
ing safety – and as cost-effectively as 
possible for you.
Please keep in mind that regular main-
tenance is not only necessary for the 
safety of your vehicle, but also plays a 
significant role in maintaining the resale 
value of the vehicle.
380us008
Service Interval Display
Advanced technology is employed to 
calculate the optimal maintenance in-
tervals, which are then indicated in the 
Service Interval Display. While conven-
tional systems rely on distance traveled 
alone to determine when service is due, 
the BMW Maintenance System has for 
years considered the actual conditions 
under which the vehicle operates.
From the point of view of maintenance, 
62,000 miles (100,000 km) accumulated 
in short-distance urban driving are not 
the equivalent of the same distance 
covered at moderate speeds in long-
distance highway travel. In response to 
this fact, the BMW Maintenance System 
monitors operating conditions as the 
basis for determining the optimum ser-
vice intervals for your individual vehicle.
The BMW Maintenance System in-
cludes the Engine Oil Service and In-
spections I and II.
Determining the maintenance intervals 
according to the actual loads on the car 
covers every kind of operating situation. 
However, even those who drive only 
short distances – significantly less than 
6,200 miles (10,000 km) annually – 
should have the engine oil changed at 
least every 2 years since oil deteriorates 
over time, regardless of use.
Service and Warranty Information 
Booklet (US models)/Warranty 
and Service Guide Booklet 
(Canadian models)
Please refer to the Service and War-
ranty Information Booklet (US models) 
or to the Warranty and Service Guide 
Booklet (Canadian models) for addi-
tional information on maintenance inter-
vals and procedures.
Depending upon operating conditions, 
as a precaution against rust it may be a 
good idea to have the body checked for 
stone damage and chips at the same 
time.
Have your BMW center do the 
maintenance and repair. Your BMW 
center is always informed on the latest 
maintenance work and repair tech-
niques and equipped with the required 
special tools. In addition, checking 
parts known from experience to be sub-
ject to wear is a permanent part of the 
maintenance specifications. Be sure 
that all maintenance work is confirmed 
in the Service and Warranty Information 
Booklet (US models) or in the Warranty 
and Service Guide Booklet (Canadian 
models). These entries will constitute 
your proof that the vehicle has received 
regular maintenance. They are also re-
quired in the event of a warranty claim.
<
 
Online Edition for Part-No. 01 41 9 791 187 - © 12/98 BMW AG