BMW serie 7 1999 Manual Do Utilizador

168

Remote control

Changing battery

Replace the battery when the message
"REMOTE KEY BATTERY" appears in
the Check Control. The LED no longer
lights up when a button is pressed and
it is no longer possible to lock the car
using the remote key.

Install only a battery of the type that is
specified in the battery compartment
(CR 2016). Be sure the battery is in-
stalled in the correct position.

1 Use a screwdriver to lift the cover at

the recess (arrow)

365de017

2 Loosen the two screws (arrows) and

remove the cover.

The battery type and its installation po-
sition are stamped into the base of the
battery compartment.

Return used batteries to a recy-
cling point or to your authorized

BMW center.

365de018

New transmitter

If you place a new transmitter into ser-
vice (either a replacement or an addi-
tional transmitter), it must be initialized:

1 Enter the vehicle and close the

driver's door

2 Briefly (max. 5 seconds) turn the

ignition key to position 1 in the steer-
ing lock, then return it to position 0

3 Remove key; press and hold down

button 1 (see illustration). Maintain
pressure on button 1 while rapidly
pressing button 2 three times in suc-
cession within a period of 10 seconds

380us014