BMW serie 7 1999 Manual Do Utilizador

Starting engine

Switching off engine

If the battery's voltage is not adequate,
the automatic starting procedure is not
initiated, or it is interrupted. Should this
condition arise, it remains possible to
jump-start the engine (refer to page

179

Do not allow the engine to warm up by
leaving it running while the vehicle re-
mains stationary. Instead, begin driving
immediately at a moderate engine
speed.

Should the engine fail to start on the
first attempt (if it is very hot or cold, for
instance):

> Press the accelerator pedal halfway

down while engaging the starter.

BMW 740i/L:
Cold starts at extremely low tempera-
tures, from approx. +57 (–156)
and at elevations above 3300 feet
(1000 meters):

> Press the accelerator pedal halfway

down while engaging the starter.

Engine idle speed is controlled by the
engine computer system. Increased
speeds at start-up are normal and
should decrease as the engine warms
up. If engine speed does not decrease,
service is required.

To prevent the battery from discharg-
ing, always switch off any electrical de-
vices not in use, as well as the ignition
when the vehicle is not being driven.

Turn the ignition key to position 1 or 0.

The vehicle must be stationary
and the selector lever in "Park"

before you can remove the ignition key.
Always remove the ignition key and en-
gage the steering lock before leaving
the vehicle.