BMW x5 2001 Manual Do Utilizador

Alarm system

If the indicator lamp flashes for
10 seconds when the system is
disarmed: an attempted entry has
been detected in the period since the
system was armed.

Following triggering of an alarm, the
indicator lamp will flash continuously.

Avoiding unintentional alarms

The tilt alarm sensor and interior motion
sensor may be switched off at the same
time. To prevent a false alarm from
being triggered (in garages with
elevator ramps, for instance), or when
the vehicle is transported by trailer or
train:

Actuate the lock (= arm the system)
twice; in other words, press button 2 of
the remote control twice in succession
(refer to page

). You may also actuate

the locks twice with the key (refer to
page

The indicator lamp lights up briefly and
then flashes continuously. The tilt alarm
sensor and the interior motion sensor
are deactivated as long as the system is
armed.

Interior motion sensor

The illustration depicts the transmitter
and receiver of the interior motion
sensor.

In order for the interior motion sensor to
function properly, the windows and
sliding/tilt sunroof must be completely
closed.

However, be sure to deactivate the
interior motion sensor (see the previous
column) when you wish to leave the
windows or sliding/tilt sunroof open.

530us019