kymco mo x500 Manual Do Serviço

„ Make sure to install new gaskets, O-rings,

circlips, cotter pins, etc. when
reassembling.

„ When tightening bolts or nuts, begin with

larger-diameter to smaller ones at several
times, and tighten to the specified torque
diagonally.

„ Use genuine parts and lubricants.

„ When servicing the motorcycle, be sure to

use special tools for removal and
installation.

„ After disassembly, clean removed parts.

Lubricate sliding surfaces with engine oil
before reassembly.

„ Apply or add designated greases and

lubricants to the specified lubrication
points.

„ After reassembly, check all parts for proper

tightening and operation.

„ When two persons work together, pay

attention to the mutual working safety.

„ Disconnect the battery negative (-) terminal

before operation.

„ When using a spanner or other tools, make

sure not to damage the motorcycle surface.

„ After operation, check all connecting

points, fasteners, and lines for proper
connection and installation.

„ When connecting the battery, the positive

(+) terminal must be connected first.

„ After connection, apply grease to the

battery terminals.

„ Terminal caps shall be installed securely.