Yamaha 02R96 Manual Do Utilizador

Using Inserts

Input Channels, Bus Outs, Aux Sends, and the Stereo Out all feature assignable Inserts.

The Insert page for Input Channels is shown below.

The Insert page for Bus Outs, Aux Sends, and the Stereo out is shown below.

Use the cursor buttons to select the parameters, and use the Parameter 
wheel, INC/DEC buttons, and [ENTER] button to set them.
INSERT ON/OFF: This turns the currently selected channel’s Insert on and off.
INSERT POSITION: This determines the position of the Insert within the channel, and 
can be set to pre-EQ, pre-fader, or post-fader.

INSERT OUT: This selects the destination for the Insert Out, which can be a Slot Output, 
Omni Out, 2TR Digital Output, or the input to an internal effects processor. See page 204 
and page 208 for Input and Output patch parameter lists. The Port ID of the currently 
selected destination is displayed below the currently selected channel’s Long name in the 
upper-right corner of the page. The destination port can also be selected by using the Patch 
Select window (see page 57), which is accessed by pressing [ENTER] while this parameter 
is selected. Insert Outs can also be patched on the Output Patch pages. See “Output Patch-
ing” on page 54 for more information.

INSERT IN: This selects the source for the Insert In, which can be an AD Input, Slot Input, 
2TR Digital or Analog Input, or the output of an internal effects processor. See page 204 for 
a list of Input Channel Insert In sources; page 208 for a list of Output Channel Insert In 
sources. The Port ID of the currently selected source is displayed below the currently