Yamaha 02R96 Manual Do Utilizador

Pairing Channels

The Pair mode can be set independently for Input Channels 1–48 and Input Channels 
49–56. The Input Channel 1–48 Pair page in Vertical mode is shown below.

Pair parameters for the Bus Outs and Aux Sends appear on the Output Pair page.

Input and Output Channels can also be selected by using the LAYER and [SEL] buttons.

A dialog box appears with options for copying the settings of the first channel to the second 
channel, the second channel to the first channel, and for resetting both channels to their ini-
tial settings. Choose the option required, and then press [ENTER].

On other display pages, paired channels have a heart icon, or a dash between their channel 
numbers.

When Input Channels are paired, MS Decoding can be used to decode signals from micro-
phones arranged as MS pairs. MS Decoding is set on the Input Channel Pair pages. This can 
be turned on and off for each pair of channels by using the MS buttons.

The Output Pair page displays the currently selected Surround mode (i.e., Stereo, 3-1, or 
5.1), which can be set on the Surround Mode page (see page 69). When a Surround mode 
other than Stereo is selected, the names of the Surround channels are shown below the Bus 
Out and Aux Send pair buttons, as shown in the following table.

L

R

C

S

—

—

L

R

Ls

Rs

C

LFE