Yamaha 02R96 Manual Do Utilizador
Automix Main Page
147
02R96—Owner’s Manual
EDIT OUT: These buttons are used to set the Edit Out mode: Off, Takeover, or Return. The
Edit Out mode determines how rerecorded fader moves align with existing fader data at the
punch out point. Fader data includes Input Channel levels, Bus Out master levels, Aux Send
master levels, the Stereo Out level, and User Defined Remote Layer faders. The Edit Out
modes are explained in the following table. The Return Time is specified on the Fader Edit
page (see page 151).
Edit Out mode determines how rerecorded fader moves align with existing fader data at the
punch out point. Fader data includes Input Channel levels, Bus Out master levels, Aux Send
master levels, the Stereo Out level, and User Defined Remote Layer faders. The Edit Out
modes are explained in the following table. The Return Time is specified on the Fader Edit
page (see page 151).
TO END
Return
Takeover or Off
OFF
At the point at which recording is stopped, the fader
returns to the position specified by the existing fader
data, at the speed specified by the Time parameter on
the Fader Edit pages.
returns to the position specified by the existing fader
data, at the speed specified by the Time parameter on
the Fader Edit pages.
At the point at which recording is stopped, the fader
remains at the same position until the next Fader
event in the existing data occurs.
remains at the same position until the next Fader
event in the existing data occurs.
ON
At the point at which recording is stopped, the fader
returns to the position specified by the existing fader
data, at the speed specified by the Time parameter,
and all subsequent events are erased so that the fader
remains at that position right through to the end of
the Automix.
returns to the position specified by the existing fader
data, at the speed specified by the Time parameter,
and all subsequent events are erased so that the fader
remains at that position right through to the end of
the Automix.
At the point at which recording is stopped, all subse-
quent events are erased so that the fader remains at
that position right through to the end of the Automix.
quent events are erased so that the fader remains at
that position right through to the end of the Automix.
Off
Return
Takeover
At the punch out point, the fader
remains at the same position until the
next Fader event in the existing data
occurs.
remains at the same position until the
next Fader event in the existing data
occurs.
At the punch out point, the fader returns
to the position specified by the existing
fader data, at the speed specified by the
Time parameter on the Fader Edit pages.
to the position specified by the existing
fader data, at the speed specified by the
Time parameter on the Fader Edit pages.
At the punch out point, recording con-
tinues until the fader position intersects
the existing fader data. If you are still
touching the fader knob at the actual
punch out point, the fader is disabled
until you release it.
tinues until the fader position intersects
the existing fader data. If you are still
touching the fader knob at the actual
punch out point, the fader is disabled
until you release it.
In this example, punch out was per-
formed by pressing the [AUTO] button,
and the fader was moved manually
between the punch out and actual
punch out points.
formed by pressing the [AUTO] button,
and the fader was moved manually
between the punch out and actual
punch out points.
Return time
Stop recording
Time
Existing data
Punch in
Fader edit
Stop recording
Time
Existing data
Punch in
Fader edit
Return time
Stop recording
Time
Existing data
Punch in
Fader edit
Stop recording
Time
Existing data
Punch in
Fader edit
Punch out
Time
Existing data
Punch in
Fader edit
Return time
Punch out
Time
Existing data
Punch in
Fader edit
Time
Punch out
Existing data
Actual punch out
Punch in
Fader edit