Yamaha 02R96 Manual Do Utilizador

Playing Back an Automix

So long as the Automix function is enabled, the Automix function will chase the incoming 
timecode and play and stop the current Automix accordingly. Playback stops automatically 
when the end of the Automix data is reached. Playback can be stopped manually by pressing 
the STOP or ABORT button on the Automix Main or Memory page. Playback will stop 
automatically if no timecode is received for a while, for example, if the timecode source is 
disconnected or turned off.

If the timecode source is set to internal, use the PLAY button on the Automix Main or Mem-
ory page to start Automix playback, and the STOP button to stop it.

You can disable Automix playback on individual channels by using the channel strip 
[AUTO] buttons. During playback, the [AUTO] button indicators appear green. When 
Automix playback for an individual channel is disabled, its [AUTO] button indicator goes 
out.

During playback, faders move in accordance with recorded Fader events (so long as the cor-
responding Layer and Fader mode is selected). Fader movement can be disabled by turning 
off the fader motors (see page 151). Fader events can be viewed on the Fader Edit pages (see 
page 151).

Other events are displayed by the display pages and button indicators. Recorded events of 
the currently selected channel are displayed by the SELECTED CHANNEL section controls 
and displays.

If the effects type is different to that which was used when the effects parameter edits were 
recorded, the parameter edits will not be played back. However, they are not deleted. When 
you rerecord effects parameter edits, it’s recommended that you delete the existing effects 
events offline. See “Editing Events Offline” on page 158 for more information.