Yamaha 02R96 Manual Do Utilizador

Chapter 18—Pro Tools Remote Layer

Press the [F2] button to select this mode.

ASSIGN: This indicator flashes when the EFFECTS/PLUG-INS [1] (ASSIGN) button is 
pressed. See “Assigning Inserts/Plug-ins” on page 182 for more information.

COMPARE: This indicator appears highlighted when the EFFECTS/PLUG-INS [2] 
(COMPARE) button is pressed. See “Editing Plug-ins” on page 183 for more information.

BYPASS: This indicator appears highlighted when the EFFECTS/PLUG-INS [3] 
(BYPASS) button is pressed. See “Editing Plug-ins” on page 183 and “Bypassing Plug-ins” 
on page 184 for more information.

INSERT: This indicator appears highlighted when the EFFECTS/PLUG-INS [4] 
(INSERT/ASSIGN) button is pressed. See “Editing Plug-ins” on page 183 for more infor-
mation.

This section displays mainly insert and plug-in-related information, although other mes-
sages are also displayed here.

This section displays information about the Parameter controls 1–4. The SEL indicators 
show the on/off status of the Parameter control push-switches. The rotary control indica-
tors show the positions of the Parameter controls. The “O” symbol below each Parameter 
control shows the automation status for each Parameter control.

Press the [F3] button to select this display mode.

In this display mode, controls for the parameters currently assigned to the Encoders are dis-
played (e.g., pan or aux send). When displaying panpots, the small circles inside the 
Encoder icons are highlighted when pan is at center. The name of each channel is displayed 
below the Encoder icons. Automation mode settings, aux send destinations, and aux send 
pre/post settings can also be displayed here. See “Viewing the Automation Mode” on 
page 187, “Viewing Send Destinations” on page 180, and “Configuring Sends as Pre or 
Post” on page 180 respectively for more information.