Yamaha 02R96 Manual Do Utilizador
Initializing the 02R96
201
02R96—Owner’s Manual
Initializing the 02R96
The 02R96 can be initialized as follows.
1
Turn off the 02R96.
2
While holding down the SCENE MEMORY [STORE] button, turn on the
02R96.
02R96.
3
When the confirmation message appears, release the SCENE MEMORY
[STORE] button, select YES, and press [ENTER].
[STORE] button, select YES, and press [ENTER].
The following message is displayed while initialization is in progress: “Loading Factory Pre-
sets & Calibrating the Faders... Do Not Touch the Faders!”
sets & Calibrating the Faders... Do Not Touch the Faders!”
It’s important that you do not touch the faders while this message is displayed, as the faders
may not be calibrated correctly.
may not be calibrated correctly.
The display returns to normal when initialization is complete.
Warning: This procedure will clear all user memories and reset all settings to their initial val-
ues. You may want to back up any important data beforehand via MIDI Bulk Dump (see
page 168). If you want to reset just the mix settings, recall scene memory #0 instead (see
page 139).
ues. You may want to back up any important data beforehand via MIDI Bulk Dump (see
page 168). If you want to reset just the mix settings, recall scene memory #0 instead (see
page 139).